Both lifts and leveling kits are designed to raise the truck body away from the axles to fit larger tires and increase ground clearance. A leveling kit involves hardware to slightly raise the front of the vehicle so it matches the stock height in the
for Polaris 800 EFI for Ranger XP, HD IRS - Up to 28"
for Polaris 800 for Ranger Crew IRS - Up to 28"
* Bolt-on installation: No cutting, drilling or welding need
*1.5" spacers are recommended, but a MINIMUM of a 1" wheel spacer is required on the front if you are running 12" diameter factory or aftermarket wheels for the wheel to clear the tie rod with the alignment cones installed. If you are running wide tires
a 1.5" or wider spacer may be required depending on the width of the tire for tire to shock clearance at full lock steering.
*New Rear Axles are recommended for Ranger 2011-2014 models before installing ANY brand of lift kit. For Ranger 2011-2014 model have lighter duty rear axles than previous year models and are more prone to breakage.
For Polaris 500 EFI For Ranger 2009-2010
For Polaris 700 EFI For Ranger XP HD IRS 2009 (Do NOT fit 2009 700 Crew)
For Polaris 800 EFI For Ranger XP HD IRS Fulsize 2010-2014
For Polaris 800 For Ranger Crew IRS Fullsize 2010-2014
Type: Lift kit
Lift Height: 3"
Material: Steel + Zinc plated
Placement on Vehicle: Left, Right, Front, Rear
Condition: Brand New
* 3” Lift Kit relocates the shock mounts to provide additional lift making room for larger tires.
* Each Lift Kit part is precision cut and zinc plated for durability and reliability in any environment.
* Increase your ground clearance and make room for larger tires to dig deep and ride hard in most any terrain
4x Lift Bracket Right
4x Lift Bracket Left
2x Alignment Cone
12x Lock Nut