Rear Brake Rotors & Ceramic Pads Set fit for Honda Accord 2003-2007 w/Hardware 45646814
Application:
| Make&Model | Year | Note |
|---|---|---|
| fit for Acura TSX | 2004-2008 | All Models |
| fit for Honda Accord | 2003-2004 | Rear Brake Type: Disc |
| fit for Honda Accord | 2005 | EX, LX, SE; GAS; Rear Brake Type: Disc |
| fit for Honda Accord | 2006 | EX, LX; GAS; Rear Brake Type: Disc |
| fit for Honda Accord | 2007 | EX-L; EX; LX; Special Edition; GAS; Rear Brake Type: Disc |
OE/Part number:
Rear Brake Disc：31315,S31315,S-31315
Rear Brake Pads：D537,P-537,D-537,537
Specification:
Condition: New
Placement on Vehicle: Rear, Left, Right
Instruction Included：Yes
Produced under an IATF 16949 quality management system
✔ Tested in accordance with relevant performance and durability requirements
✔ Strict quality inspection fit for dimensional accuracy and material consistency
Product size：
- Brake Rotors
| Installation position | Rear Dirver & Passenger Side |
| Material | G3000 Iron Alloy |
| Solid Or Vented Type Rotor | Solid |
| Rust Resistant Coating | Anti-rust oil treatment |
| Directional or Non-Directional Brake Surface |
Directional |
| ABS Tone Ring Included | No |
| Bearings Included | No |
| Mounting Bolt Hole Quantity | 5+2+2 |
| Mounting Bolt Hole Circle Diameter(mm) | 114.3 |
| Outside Diameter(mm) | 259.5mm/10.24" |
| Overall Height(mm) | 48.6 |
| Nominal Thickness(mm) | 9.1 |
| Bolt Diameter(mm) | 5-φ12.8 |
| Hub Holes Centering Diamete(mm) | 64.2 |
- Brake Pads
| Installation position | Rear Dirver & Passenger Side |
| Fitment | Direct Replacement |
| Backing Material | Steel |
| Pad Material | NAO Ceramic |
| Pad Shims Included | Yes |
| Mounting Hardware Included | Yes |
| Mounting bolt | No |
| Lubricant Included | Yes |
| Pad Wear Sensor Included | Yes |
| Pad Wear Sensor Type | Mechanical Sear Sensor |
| Inner Pad Width(mm) | 88.78 (±0.3) |
| Inner Pad Height(mm) | 47.2 (±0.3) |
| Inner Pad Thickness(mm) | 14.5 (-0.5) |
| Outer Pad Width(mm) | 88.78 (±0.3) |
| Outer Pad Height(mm) | 47.2 (±0.3) |
| Outer Pad Thickness(mm) | 14.5 (-0.5) |
Note on Initial Brake Noise
- Common Causes:
① New pads and rotors not fully bedded, causing uneven contact.
② Before anti-rust coating on rotors wearing off, may cause slight hissing.
③ Thin surface rust forms on rotors overnight in humid conditions, resulting in a squeak during initial braking.
- Resolution:
Noise will naturally disappear after 200–500 miles of normal driving. Avoid hard braking during this period.
Package included:
2x Rear Drilled and Slotted Brake Rotors
4x Rear Brake Pads w/Hardware
Features:
● Heat dissipation cuts thermal fade fit for stable braking
● Lightweight build enhances handling & responsiveness
● Reduce noise fit for quiet & smooth braking
● Shorter stopping distance in emergencies
Notice:
● New installed, if noise, it takes hundreds of miles to run in.
● If shaking, usually not installed correctly, try to instal again
● Please confirm your vehicle condition and OE number before placing an order!
● Please note that this is an after-sales part, not an original part.
● We suggest that you seek professional installation to avoid unnecessary trouble.
a. Notice
1. California Prop 65 Warning
2. Authority ID：MXR02FXSY（Very important, please do not delete）